7
Installation
7.5 Install the exhaust duct into the window
Remove the unit with the packed exhaust duct next to the window, and then connect the adaptor B
(flat mouth) of the exhaust duct with the window. (Fig. E)
C
Note: Cover the hole using the adaptor cap when not in use.
Note:
C
1. The duct can be compressed to 270 mm minimum and extended to
1500 mm maximum. It is better to keep the duct length to a minimum.
2. Stretching or bending the duct excessively will affect the cooling efficiency. (As the
following fig. shows)
Mobile room air conditioner / Installation Manual
Fig. E
Do not!
Yes!
33 / 88 EN