Beko BX 109 C Installation Manual page 32

7 Installation
2. Attach the window slider kit to the window sash. Adjust the length of the Window slider kit: Loose
the screw A to adjust the length of the Window slider kit, then tight the screw when the length is
suitable.
C
Note: The length of the Window Slider Kit is 67.5cm to 120cm.
3. Carefully lower the window. Secure the vent panel in place with 4 type B screws,plus one screw for
each extension.
4. Cut the foam seal B(non-adhesive) to the window width. Stuff the foam seal B between the glass
and the window to prevent air and insects from getting into room.
5. Install the security bracket with a type B screw, as shown.
32 / 88 EN
Screw B
Foam
Seal
Mobile room air conditioner / Installation Manual