Siemens M20 Terminal Technical Description page 149

Siemens Information and Communication Products
Called party rejects call
Event Display text: 1
Display text: 2
Alerting
[Dial]
PLMN signal Call Dropped
On-hook [Idle display]
Outgoing seizure:
Event Display text: 1
Display text: 2
Off-hook, Alerting
PLMN signal
[Dial]
Call [Dial]
Calling
Clear down before answer
Event Display text: 1
Display text: 2
Call [Dial]
Calling
Disconnect = Ending Call
on-hook
[Dial]
6.5.4 Clearing down – idle status
The user can switch to idle from all telephone statuses by replacing the handset.
6.5.5 Dialling with abbreviated dialling keys
Signal transmission to the PLMN is started by briefly (< 300 ms) pressing an abbreviated dialling key after lifting the
handset. A message appears on the display if there is no call number programmed for the abbreviated dialling key. Pro-
gramming abbreviated dialling keys is described in Chapter
Event Display text: 1
Display text: 2
Off-hook
<KW> Calling
[Dial]
Version 8 dated 15.03.00
st
line Remark
nd
line
st
line Remark
nd
line
st
line Remark
nd
line
Calling party clears down the call. Display returns to
idle
6.5.7 "Programming abbreviated dialling keys" on page 150
st
line Remark
nd
line
Display is deleted
Proceed-to-signal tone on
Proceed-to-signal tone off, procedure performed by
manual dialling
Man Machine Interface
.
A
149