Siemens M20 Terminal Technical Description page 210

Siemens Information and Communication Products
S06:002
S07:060
S08:002
S09:006
S10:100
S12:050
S14:2AH Set echo result code....
S16:00H Function Internal use only
S18:002 Function Internal use only
S21:20H
S22:46H Reporting options
S23:16H Set local Bit rate and Parity
S25:005 Function Internal use only
S26:001 Function Internal use only
S27:00H Function Internal use only
M1
Class 5
Messages
/REL-Appendix
Requested service type
Requested operating Mode
BPS rate adjust
Echo
Terminal port flow control
Modem port flow control
XON/XOFF pass through
Auto-reliable buffering
Fallback character
Maximum block size
Break type
Inactivity timer
Error summary In-Coming
Requested operating class
Requested service level
Maximum allowable errors
Originator delay
DCE speed
Parity generation
Parity type
Word length
Stop bits
Version 8 dated 15.03.00
: Enabled (%C1)
: On (Q0)
: On (\V1) F
: Stream (\L0) F Internal use only
: Normal (\N0)
: Off (\J0) F Internal use only
: Off (\E0) F Echo
: RTS/CTS (\Q3) F Q0 no handshake
: None (\G0)
: Disabled (\X0) F Internal use only
: None (\C0) F Internal use only
: 0 (%A0) F Internal use only
: 256 (\A3) F Internal use only
: Queued (\K5) F Internal use only
: 0 (\T0) F Internal use only
: 0 Out-going: 0 F Internal use only
: Class 2 (#C1) F Internal use only
: Standard (#S1) F Internal use only
: 2 (#E2) F Internal use only
: 5 (#D5) F Internal use only
: 9600 (#M6) F Internal use only
: Disabled F Internal use only
: Even
: 8 Bits
: 1
F Not available
S7=x
F No effect at GSM
Not available
F S10=x
F Not available
ATE,ATQ,ATV
AT%Dn, AT&D,AT&C
ATXn
+ipr=x,x
F
F
F
Description
Internal use only
Q3 default HW handshake
Migration M1 to M20
M20
Q0
+crc=x (0,1) reply is
V42B...
+cbst=x,0,(0 or 1)
E0
+ifc=x,x
+ifc=x,x
AT+ipr=x,x
At+ipr=x,x
At+ipr=x,x
A
210