Siemens M20 Terminal Technical Description page 41

Siemens Information and Communication Products
ATS4 Set response formatting character
Read command Response
ATS4? <n> OK
Set command Response
ATS4=<n> This parameter setting determines the character generated by the TA for result code and informati-
on text.
OK
Parameter
<n>
Note:
Reference Note
V.25ter
ATS5 Set command line editing character
Read command Response
ATS5? <n> OK
Set command Response
ATS5=<n> This parameter setting determines the character recognized by TA as a request to delete the imme-
diately preceding character from the command line.
OK
Parameter
<n>
Note:
Reference Note
V.25ter
ATS7 Set number of seconds to wait for connection completion
Read command Response
ATS7? <n> OK
Set command Response
ATS7=<n> This parameter setting determines the amount of time to wait for connection completion when ans-
wering or originating a call.
OK
Parameter
<n>
Reference Note
V.25ter
ATS8 Set number of seconds to wait when comma dial modifier
Read command Response
ATS8? <n> OK
Set command Response
ATS8=<n> No effect at GSM
OK
Parameter
<n>
Reference Note
V.25ter
Version 8 dated 15.03.00
0-10-127
default 10 = LF
0-8-127
default 8 = backspace
0-60-255 number of seconds to wait for connection completion
0 no pause when comma encountered in dial string
2 Default value
1-255 number of seconds to wait
response formatting character
command line editing character
AT command interface
A
41