Terminals B3Q460 / 480 / 550 - Siemens Cerberus CS1140 Commissioning

3.4.19

Terminals B3Q460 / 480 / 550

Pos. Component
1 Protective cover
2 RAM modules (2x 512kx8)
RAM set Z3S070
3 EPROMs (2x 512kx8) or (2x
1024kx8) for China
EPROM set CTQ..., CIQ... or
CTQT1.., CIQT1.. for China
4 DIL switch S5
Maintenance switch
5 Jumpers (R49/50/31...34)
C-Bus impedance
6 Labels
included in Z5B....
7 RS232 interface card E3I020
with Z1B020 (optional)
8 Plug-in terminals K5/K6/K7
9 Jumper X30
C-Bus potential
6
6
Fire & Security Products
Siemens Building Technologies Group
Remove (re-install last)
install
install
(note ODD and EVEN positions)
Set all switches to OFF
possible modify
Õ See hardware description
(document e1260)
insert
Install and connect up
Connect the connecting cable to the main con-
trol unit according to system documentation
Set according to hardware description
(document e1260)
CAUTION:
Take precautions to safeguard against voltage
surges when inserting RAM modules and EPROMs.
1
Make sure modules are pushed fully home in their
slots.
6
7
Preparation
2
3
On completion of preparation work, install ter-
minal and connect up all cables as per system
documentation
Default
installed
not installed
not installed
Set all switches to OFF
Used for 110W imped-
ance (G51)
delivered separately or
must be ordered separately
not available
plug-in terminals supplied
Open
(floating)
4
5
8
9
17
e1249d 1
01.1999