Battery Charging Module E3C011 (Supersedes E3C010); Rs232 Module E3I020 - Siemens Cerberus CS1140 Commissioning

3.4.4

Battery charging module E3C011 (supersedes E3C010)

Pos. Component
1 DIL Switch S2
Battery type
2 DIL switch S3
I-Bus address
Caution!
The jumper between terminals 2 and 3
must always be inserted when the
E3C010 is used (Õ document e1260)!
On the E3C011 this connection is al-
ready provided on the module.
3.4.5

RS232 module E3I020

Caution!
Never connect or disconnect ribbon
cable when power supply is con-
nected.
This may cause the system to restart.
8
Fire & Security Products
Siemens Building Technologies Group
Preparation
Set to battery type used
Õ See hardware description
(document e1260)
Set as per system documentation
2
1
Default
Type
«ALARMCOM (FIAM)»
address 0
e1249d 1
01.1999