Address Allocation Through Insertion - Siemens Cerberus CS1140 Commissioning

Fire detection system
Hide thumbs Also See for Cerberus CS1140:
Table of Contents

Advertisement

Recommendation:
Extending a system:Carry out 'address allocation by insertion'
(less risk of confusion than with address allocation by activation).
New systems: Carry out 'address allocation by activation'
(faster detector response time with localization).
4.4.3

Address allocation through insertion

Requirements
Switch control unit to 'Address allocation through insertion' mode
Localize the first device
Fire & Security Products
Siemens Building Technologies Group
ÕWith the DC1131, the control unit cannot differentiate between the operation of the
key for address allocation and any signals at the input. Faults arise in the localization
structure if input signals are read in.
Automatic detectors:
Detector bases installed
Detectors not inserted
ÕAutomatic detectors already inserted must be localized and allocated in the
control unit, otherwise faults arise in the localization structure during address
allocation
Manual call points:
Manual call points mounted (incl. electronics)
ÕManual call points must also be localized by 'activation' in 'location by insertion'
mode.
Input/output modules:
Terminal block mounted
Electronics not inserted
ÕInput/output modules are localized by inserting the electronics. Unlike the inter-
active system it is not possible to localize input or output modules in this localization
mode by 'activation'!
T-branch module DC1135:
Before installing the DC1135 no detectors may be inserted in the stub line!
ÕDetectors which have been inserted but not localized must either be removed again
or localized through activation
Wait until the control unit is ready
Insert automatic detectors or the electronics for an input / output module or activate
manual call points
Wait until the response indicator flashes
ÕCan take up to 60 seconds depending on configuration
ÕResponse indicator flashes for about 5 seconds
No other device may be inserted for at least 20 seconds
The device must no longer be removed until address allocation is completed.
(Õ page 91)
35
e1249d 2
01.1999

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents