Linux - Fujitsu ETERNUS LT140 User Manual

Chapter 1 Overview
1.2 References for Setup
1.2.2

Linux

1.2.2.1 SAS Connection for Linux
The following procedure explains how to connect the LT140 to a Linux server with a SAS connection.
Workflow
Refer
Refer
Refer
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Making a Check before Starting the Procedure
Check the environment (operating system, backup software, and HBAs) of the server to be
connected to the LT140.
-
"1.1 Operating Environment" (page 8)
Setting the LT140
Perform the settings for the LT140.
-
"2.1 Settings for SAS Connections" (page 22)
Setting the Operating System
Make settings for the HBA driver and the device driver.
-
"3.2 Linux" (page 28)
-
"3.2.1 Fibre Channel Connections/SAS Connections" (page 28)
Copyright 2019 FUJITSU LIMITED
13
P3AG-3752-03ENZ0