Fujitsu ETERNUS LT140 User Manual page 45

Chapter 4 Setting Backup Software
4.5 NetVault
13
14
15
16
17
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Set the Cleaning items as shown below.
• Automatic Cleaning Supported
ON (the default setting is "ON")
• Barcode Prefix(es) of cleaning media
Set with the character string that is on the label of the cleaning cartridge.
• Cleaning Slots
The slot numbers where the cleaning cartridges are to be stored.
Enter "b" and then press the [Enter] key.
The Changer Configuration screen appears again.
In the Changer Configuration screen, enter "s" to save the settings.
Enter "q" to quit the Drive Configuration screen.
In [Manage Devices] of NetVault WebUI, click the [Manage Library] button of the target library
to switch to the Tape Library Management screen.
Reboot the library by clicking the [Restart] button at the lower right.
The new settings are applied after the library is rebooted.
Copyright 2019 FUJITSU LIMITED
45
End of procedure
P3AG-3752-03ENZ0