Fujitsu ETERNUS LT140 User Manual page 19

Chapter 1 Overview
1.2 References for Setup
1.2.3.2 Fibre Channel Connection (FC-AL Connection) for Windows
The following procedure explains how to connect the LT140 to a Windows server with an FC-AL connection
(direct connection to a server).
Workflow
Refer
IMPORTANT
Refer
Refer
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Making a Check before Starting the Procedure
Check the environment (operating system, backup software, and HBAs) of the server to be
connected to the LT140.
-
"1.1 Operating Environment" (page 8)
Setting the LT140
Perform the settings for the LT140.
Change the topology setting to "Fabric (N/F)" or "Loop (L)". Set fixed values for the link speed
and the Loop ID/ALPA.
-
"Chapter 2 Setting the LT140" (page 22)
-
"2.2 Settings for Fibre Channel Connections" (page 22)
-
"2.2.1 Setting the Link Speed" (page 22)
-
"2.2.2 Setting the Topology and the Loop ID (for Direct Server Connections)" (page 23)
Setting the Operating System
Make settings for the HBA driver and the device driver.
-
"3.3 Windows" (page 29)
-
"3.3.2 Fibre Channel Connections" (page 30)
Copyright 2019 FUJITSU LIMITED
19
P3AG-3752-03ENZ0