Chapter 4 Setting Backup Software
4.5 NetVault
-
For NetVault Backup 10 and later
To use the cleaning function for NetVault Backup 10 or later, perform the following settings using the
"deviceconfig" command.
If NetVault Backup 11.2 or later is used, the settings can be performed with the WebUI. For details,
refer to
Procedure
1
2
3
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
"- When WebUI is used with NetVault Backup 11.2 or later" (page
Start the command prompt and change directory to the following location.
<Installation folder for NetVault>\bin
Execute the "deviceconfig" command to perform the drive cleaning settings.
deviceconfig.exe –username <user_name_for_NetVault> -password <password>
-drivemachine <NetVault_machine_name_where_the_drive_is_connected>
-drivepath <drive_name_or_path_to_the_drive>
The Drive Configuration screen appears.
Enter "6" and then press the [Enter] key.
"6) Generic Cleaning..." is selected. The Generic Cleaning screen appears.
Copyright 2019 FUJITSU LIMITED
42
46).
P3AG-3752-03ENZ0