References For Setup; Solaris Os - Fujitsu ETERNUS LT140 User Manual

Chapter 1 Overview

1.2 References for Setup

1.2 References for Setup
1.2.1

Solaris OS

1.2.1.1 SAS Connection for Solaris OS
The following procedure explains how to connect the LT140 to a Solaris OS server with a SAS connection.
Workflow
Refer
Refer
Refer
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Making a Check before Starting the Procedure
Check the environment (operating system, backup software, and HBAs) of the server to be
connected to the LT140. In addition, check the precautions before starting the procedure.
-
"1.1 Operating Environment" (page 8)
Setting the LT140
Perform the settings for the LT140.
-
"2.1 Settings for SAS Connections" (page 22)
Setting the Operating System
Make settings for the HBA driver and the device driver.
-
"3.1 Solaris OS" (page 25)
-
"3.1.1 SAS Connections" (page 25)
-
"3.1.3.1 Getting the Server to Recognize the Device" (page 26)
Copyright 2019 FUJITSU LIMITED
9
P3AG-3752-03ENZ0