ABB TZID Operating Instructions Manual page 18

Mounting TZID shifted by 90° to an actuator turning counterclockwise
Fig. 10 Adapter position (shifted by 90°)
Counterclockwise
rotation of the
actuator
Fig. 11 Mounting TZID to an actuator turning
counterclockwise, shifted by 90°
18
Setscrew with
flat point
Setscrew with
cone point
Electro-pneumatic positioner TZID
Clockwise rotation of
the positioner
• Undo the setscrews on the
shaft adapter.
• Shift the adapter by 90°, as
shown in Fig. 10.
• Re-fasten the setscrews.
• Couple the
adapter with the rotary actu-
ator's shaft.
• Turn TZID clockwise by
approx. 15° (siehe Fig. 11).
• Fasten TZID with screws.
42/18-54 EN
positioner's