ABB TZID Operating Instructions Manual page 19

Mounting TZID in parallel with an actuator turning clockwise
Fig. 12 Adapter position (shifted by 90°)
Clockwise
rotation of
the actuator
Fig. 13 Mounting TZID in parallel with an
actuator turning clockwise
42/18-54 EN
Setscrew with
flat point
Setscrew with
cone point
Electro-pneumatic positioner TZID
Clockwise rotation
of the positioner
• Undo the setscrews on the
shaft adapter.
• Shift the adapter by 90°, as
shown in Fig. 12.
• Re-fasten the setscrews.
• Couple the
adapter with the rotary actu-
ator's shaft.
• Turn TZID clockwise by
approx. 105° (see Fig. 13).
• Fasten TZID with screws.
positioner's
19