Display And Operator Panel - ABB TZID Operating Instructions Manual

4

Display and operator panel

The TZID positioner's display and operator panel is accommodated in the hinged cover
(siehe Fig. 22), requiring that the case is opened for operation.
Display
"Reset" button
Fig. 22 Display and operator panel
The display and operator panel is designed for two tasks and, therefore, provides two
operating levels:
Operating level 1
Operating level 2
If troubles occur during operation or commissioning, an error code appears on the dis-
play. Refer to the Appendix for a reference list of the error codes with their reasons and
suggestions for help. When the positioner is started, the software revision level (5.0 at
the time when this document is prepared) is shown on the display for a short time.
42/18-54 EN
Mode
Reset
LKS connector "Up" button
Rotary switch
"Mode"
Monitoring and special adjustment while the system is
running.
Commissioning and configuration (basic functions)
Electro-pneumatic positioner TZID
Operating mode
1.0 Controlling, adaptive
1.1 Controlling, fixed
1.2
Manual control up/down
Setting of switches
1.3
Press and hold + Press briefly
Reset
2.0 Autostroke
2.1 Man. deadband adjustment
2.2 Position sensor span
2.3 Zero adjustment
Press briefly
Press and hold
to abort
to save changes
"Down" button
Reset
31