Process Display; Switching To The Information Level (Operator Menu) - ABB PositionMaster EDP300 Operating Instruction

PositionMaster EDP300 DIGITAL POSITIONER | OI/EDP300-EN REV. D

Process display

-
1
6
Position
POS
3 5
1 Indication of measuring point
tagging
2 Indication of current process
values
3 Symbol indicating button
function
Figure 29: Process display (example)
The process display appears on the LCD display when the device
is powered on. It shows information about the device and
current process values.
The way in which the current process values (
be adjusted on the configuration level.
Description of symbols
Symbol Description
Call up information level.
When Autoscroll mode is enabled, a
the operator pages are automatically displayed one after the
other.
Call up configuration level.
The device is protected against changes in the parametrization.
Description of the message symbols
Symbol Message symbol
Universal input activated
Diagnostic message pending
Error pending
Maintenance message pending
50.0
°%
4 3
M10240-01
4 Symbol indicating
'Parameterization protected'
5 Diagnosis notice
6 Operating mode symbol
) are shown can
2
symbol appears here and
Switching to the information level
(Operator Menu)
On the information level, the operator menu can be used to
display diagnostic information and choose which operator
pages to display.
2
Process display
1. Use to go to the information level.
Operator Menu
Diagnosis
Operator Page 1
Signals View
Back
2. Use or
3. Confirm the selection with
Menu
... / Operator Menu
Diagnosis
Operator Page 1
Signals View
Select
select a submenu.
.
Description
Displays the alarms and messages that are currently
pending and which occurred in the past. The
messages to be displayed can be selected on the
configuration level, under 'Diagnosis'.
Switches to the process display.
Selection of submenu 'Signals View' (only for service
purposes).
The following signal values (plus units) can be
displayed:
• Position Pos[%]
• Position Pos[°]
• Set point SP[%]
• Set point SP[mA]
• Control deviation DEV [%]
• Electronic unit temperature [°C, °F, °R, K]
• Supply pressure PIN [unit]
• Pressure output 1 PY1 [unit]
• Pressure output 2 PY2 [unit]
• Differential pressure DP [unit]
• Universal input value UIN [unit]
41