Edp300 Remote Sensor Electrical Connection; Electrical Data For Inputs And Outputs - ABB PositionMaster EDP300 Operating Instruction

PositionMaster EDP300 DIGITAL POSITIONER | OI/EDP300-EN REV. D

EDP300 Remote Sensor Electrical Connection

A Basic device
B Options
Figure 21: EDP300 Remote Sensor Electrical Connection
Change from one to two columns
Connections for inputs and outputs
Terminal Function / comments
EDP300 Control Unit
1 / 2 / 3
Limit switch Limit 1 with proximity switch
+51 / 52
(optional)
Limit switch Limit 2 with proximity switch
+41 / 42
(optional)
Limit switch Limit 1 with microswitch
51 / 52 / 53
(optional)
Limit switch Limit 2 with microswitch
41 / 42 / 43
(optional)
A
1
1 2 3
B
2
Limit 1
Limit 1Limit 2
+51 -52 +41 -42 51 52 53
1 Position sensor
2 Limit monitor with proximity switches (optional)
3 Limit monitor with microswitches (optional)

Electrical data for inputs and outputs

Note
When using the device in potentially explosive atmospheres,
note the additional data in Use in potentially explosive
atmospheres in accordance with ATEX and IECEx on page 6 and
Use in potentially explosive atmospheres in accordance with
FM and CSA on page 10!
3
Limit 2
41 42 43
M10949 M10949
25