ABB PositionMaster EDP300 Operating Instruction page 66

66 PositionMaster EDP300 DIGITAL POSITIONER | OI/EDP300-EN REV. D
... 9 Operation
... Parameter descriptions
Menu: SW 1 Mask Map
Menu / parameter Value range
Input/Output / Digital Feedback / SW 1 Mask Map
Alarm Maintenan. On, Off
Alarm OoSpec.
Alarm Check Fct.
Alarm Failure
Switch 1 Sim.
Menu: SW 2 Mask Map
Menu / parameter Value range
Input/Output / Digital Feedback / SW 2 Mask Map
Alarm Maintenan. On, Off
Alarm OoSpec.
Alarm Check Fct.
Alarm Failure
Switch 1 Sim.
Description
When a general alarm is issued, an alarm current can be sent via the analog position feedback. These
alarm groups are defined in accordance with Namur NE107. Each individual group can be activated.
• Alarm Maintenan. – Maintenance needed
• Alarm OoSpec. – Operation outside specifications
• Alarm Check Fct. – Functional test needed
• Alarm Failure – Errors
Use this parameter to simulate the switch function.
• Off –Simulation deactivated
Description
When a general alarm is issued, an alarm current can be sent via the analog position feedback. These
alarm groups are defined in accordance with Namur NE107. Each individual group can be activated.
• Alarm Maintenan. – Maintenance needed
• Alarm OoSpec. – Operation outside specifications
• Alarm Check Fct. – Functional test needed
• Alarm Failure – Errors
Use this parameter to simulate the switch function.
• Off –Simulation deactivated