Menu: Device Info - ABB PositionMaster EDP300 Operating Instruction

PositionMaster EDP300 DIGITAL POSITIONER | OI/EDP300-EN REV. D

Menu: Device Info

Note
This menu is only used to display the device parameters. The parameters are displayed independently of the configured access level,
but cannot be changed.
Menu / parameter Value range
Device Info
Hardware Rev.
Software Rev.
Mounting Date
Commun. Tag
Long Tag*
Device Address
Descriptor
Device Message
Pneumatic Type Single / Safe
Single / Freeze
Double / Safe
Double / Freeze
Stroke Time Up 0 to 200 s
Stroke Time Dn 0 to 200 s
* Visible only with HART® 7
Description
The hardware revision is displayed here.
The firmware revision is displayed here.
The installation date is displayed here. The date can only be entered and changed using a PC (DTM /
EDD).
The communication name is displayed here. The name can only be entered and changed using a PC (DTM
/ EDD).
The long text for the measuring point tag is displayed here.
The device address is displayed here.
The measuring point tagging is displayed here. The description can only be entered and changed using a
PC (DTM / EDD).
The device information is displayed here. The description can only be entered and changed using a PC
(DTM / EDD).
The type of pneumatics that the device works with is displayed here.
After installing a different type of pneumatics, this type needs to be set in the 'Service -> Pneumatic'
menu.
• Single / Safe – Single acting, safety position with no current, with venting function
• Single / Freeze – Single acting, safety position with no current, with blocking function.
• Double / Safe – Double acting, safety position with no current, with venting function.
• Double / Freeze – Double acting, safety position with no current, with blocking function.
The stroke time determined by Auto Adjust (only Auto Adjust types 'Stroke' and 'Full') for the direction of
the 100 % position is displayed here.
The stroke time determined by Auto Adjust (only Auto Adjust types 'Stroke' and 'Full') for the direction of
the 0 % position is displayed here.
71