ABB TZID Operating Instructions Manual page 20

Mounting TZID shifted by 90° to an actuator turning clockwise
Setscrew
with flat point
Fig. 14 Adapter position (factory setting)
Clockwise
rotation
of the
actuator
Fig. 15 Mounting TZID to an actuator turning
clockwise, shifted by 90°
20
Setscrew
with cone point
Clockwise rotation
of the positioner
Electro-pneumatic positioner TZID
The TZID positioner is prepared
for this type of mounting when it
is delivered. No adapter settings
are required.
• Couple the
adapter with the rotary actu-
ator's shaft.
• Turn TZID clockwise by
approx. 105° (see Fig. 15).
• Fasten TZID with screws.
positioner's
42/18-54 EN