Maintenance and service
10.1
Safety instructions
Toxic gases
This device is designed for operation with toxic, lightly corrosive gases. Therefore, dangerous
substances may exit from the gas lines when they are opened.
Prevent gases from exiting prior to opening or removing the device, for example:
● Lock the gas inlets and gas outlets.
● Separate the gas lines from the device.
Faults at the device
If you are unable to eliminate faults, place the device out of service and protect it against
inadvertent commissioning.
Hot surface
Following shutdown, the analyzer module is still very hot. Wait until the analyzer module has
cooled down before dismounting.
Note
Depending on the use of the device and certain empirical values, determine a maintenance
interval for the tests to be carried out repeatedly.
The maintenance interval is also influenced by the corrosion resistance of the materials coming
into contact with the sample gas, for example, depending on the respective location of use.
Note
Do not open the device during operation. Open the device only for installation or maintenance.
Rack-mounted device
Operating Instructions, 05/2015, A5E31874006-03
WARNING
WARNING
CAUTION
10
115