3.6
CALOMAT 7
①
②
③
④
Figure 3-8
Note
Condensation in the analyzer module
Ensure that the sample gas dew point is at least 5K below the ambient temperature. If
necessary, use a sample gas cooler.
The internal sample gas paths are not heated. The thermal conductivity sensor mounting block
is heated to 72 °C.
Rack-mounted device
Operating Instructions, 05/2015, A5E31874006-03
Sample gas inlet
Sample gas outlet
n.c.
n.c.
Design of CALOMAT 7, sample gas path with pipes
⑤
Power supply connection
⑥
Analog output/digital output
⑦
CAN connection
Description
3.6 CALOMAT 7
37