Plug & Measure Permitted Activities; Plug & Measure; Figure 3-16 Retrofitting Of The Sample Gas Restrictors: Example "Pressure Operation, Serial - Siemens SIPROCESS GA700 Operating Instructions Manual

Retrofitting example "Suction operation, serial" operating mode for OXYMAT 7/ULTRAMAT 7
When you are using the ULTRAMAT 7 and the OXYMAT 7 analyzer module in serial suction
operation, you must convert the sample gas restrictor of the OXYMAT 7 analyzer module:
Sample gas inlet → Sample gas outlet.
MGE, VGE
MGA/VGA
①
②
③
④
⑤
Figure 3-16
3.7.4 Plug & measure permitted activities
3.7.4.1 Plug & measure
Term
"Plug & Measure" is the ability to recognize any analyzer modules and/or option modules added
at a later time and to integrate them. This ability makes it easier to replace modules for
maintenance purposes as well as installing devices at a later time, for example, option modules.
When you replace or retrofit a module, the processing unit recognizes the change in the device
configuration during a restart. The type of module as well as its parameter assignment are
recognized. You have the option to apply the parameter assignment of the replacement/retrofit
module or to use the one of the previous module.
Rack-mounted device
Operating Instructions, 05/2015, A5E31874006-03
Sample gas inlet (MGE), Reference gas inlet (VGE)
Sample gas outlet (MGA)/reference gas outlet
Remove sample gas restrictor from the sample gas inlet of the additional OXYMAT 7
analyzer module
Install the clamping screw into the sample gas inlet of the additional OXYMAT 7 analyzer
module
Install the sample gas restrictor into the sample gas outlet of the additional OXYMAT 7
analyzer module
Install additional OXYMAT 7 analyzer module
Target configuration: ULTRAMAT 7 and OXYMAT 7 in serial suction operation
Retrofitting of the sample gas restrictors: Example "Pressure operation, serial"
Description
3.7 Combined operation
51