Sony UP-DF750 Setup And User's Manual page 18

When you use the unit for the first time
The above message should appear when you use the
unit for the first time, because the film sheets are not
loaded in the film trays of the unit.
For detailed information on how to load the film sheet,
see "Loading Film Sheets" on page 19.
When you already use the unit
When the above message appears, the unit is ready to
print.
Note
If the ?/amain POWER switch located on the rear
panel is not set to on, the power is not on even though
the 1ON/STANDBY switch located on the front
panel is set to on.
Turning the unit off
Use the 1ON/STANDBY switch located on the front of
the unit to turn the unit off during daily use.
1
Press the 1ON/STANDBY switch to turn the unit off.
The 1ON/STANDBY indicator blinks and goes off.
The message "Please Wait" appears on the LCD, and
then the message disappears.
The printer is turned off.
18
Connections
When you do not intend to use the printer for a
long time
Turn the printer off as follows.
1
Press the 1ON/STANDBY switch.
The 1ON/STANDBY indicator blinks and goes off.
The message "Please Wait" appears on the LCD, and
then the message disappears.
The printer is turned off.
2
Set the ?/amain POWER switch located on the rear
of the unit to the off (a) side.