Sony UP-DF750 Setup And User's Manual page 48

2
Remove jammed film according to the status
displayed.
When a film sheet pops out from the shutter
of the feeding position of the film tray:
Remove the jammed film sheet slowly while holding
the film with both hands.
Do not reuse the removed film. Discard it.
When a film sheet is jammed between the
feeding position and the shutter of the film
tray:
Put it back in the film tray.
When a film sheet is jammed inside the unit:
Remove the jammed film sheet slowly while holding
the film sheet with both hands.
Do not reuse the removed film. Discard it.
3
Re-insert the film tray as it was.
48
Troubleshooting
When placing the unit vertically
Pay attentions to the following points when you remove or
insert the film tray with the unit placed vertically.
• Do not give a shock to the film tray. Doing so may cause
the film sheets will move inside the film tray. This may
result in the film jamming.
• When removing or inserting the film tray, hold it by
pushing the cover with both hands. If you hit the film
tray, the cover of the film tray will open and the film
sheets may pop out.
• If you slant the film tray, the film sheets may move to the
outlet of the film tray. This may cause film jamming. In
such a case, put the film sheets back inside the film tray
by pushing them with your fingers, as shown.