Sony UP-DF750 Setup And User's Manual page 30

2
Press the F or f button to move the cursor to "Print
Quality," and then press the g button.
The unit enters the film selection mode.
3
Press the F or f button to select "Standard Film" or
"Mammo Film" as target for registering values, and
then press the g button.
The unit enters the gamma selection mode.
4
Press the F or f button to move the cursor to the
gamma curve for which you want to make image
adjustments, and then press the g button.
The unit enters the image adjustment mode.
5
Press the g button.
The unit enters the sharpness adjustment mode.
30
Menu Operation
6
Select the desired level by pressing the F or f button.
The sharpness setting range is 1 - 16 or OFF. The
default setting is OFF.
Pressing the F button increases the sharpness value,
emphasizing the outline of the print image.
Pressing the f button decreases the sharpness value,
making the outline of the print image less distinct.
After the sharpness has been adjusted, print a density
pattern and adjust the value while checking the
printed result.
7
Press the EXEC button.
The sharpness setting is stored, and the unit enters the
test pattern print mode.
8
Press the F or f button to move the cursor to the tray
containing the blue thermal film to be used for
printing the density pattern.
Current
sharpness