Sony UP-DF750 Setup And User's Manual page 61

3
Press the g button.
The network setup screen appears.
Up to five different network settings can be saved in the
unit as Presets.
You can call up a Preset and apply network settings by one
of the following two methods. For details, refer to the
indicated page.
• Editing a Preset (Preset 1 - 5) and applying the new
settings (page 61)
• Calling up a Preset (Preset 1 - 5) and applying its settings
(page 63)
Note
If no button of the unit is operated during network setup for
a period of about 30 minutes, the unit reverts to the
standard screen. Any settings that were made up to that
point will be lost.
To edit a preset and use the result as
network settings
1
Use the F and f buttons to move the cursor to "Edit"
and press the g button.
The Edit Preset screen appears.
2
Press the g button.
A screen for selecting the Preset (Preset 1 - 5) or
"Temporary" appears.
Settings made after selecting "Temporary" will not be
stored as a Preset but used only as network settings for
the unit.
3
Use the F and f buttons to move the cursor to the
number of the Preset to edit and press the G button.
(In this example, "Preset 1" is selected.)
The Edit Preset screen appears again.
61
Setting the IP Address