When the top cover and inner cover 1 are
opened
When the top cover, inner cover 1, and inner
cover 2 are opened
2
Close the opened cover(s) firmly.
The following message appears on the LCD.
Wait until the message disappears.
50
Troubleshooting
When the unit enters standby status, the following
message appears.
To remove film jammed in the output tray
1
Remove the output tray completely.
2
Remove the jammed film near the inside of the unit.
3
Re-insert the output tray as it was.
Note
Be sure to inert the output tray completely.
For detailed information on how to insert the output
tray completely, see page 15.
To remove film jammed in multiple locations
Open all of the covers, rear, front, top, and inner covers and
check the location of the jammed film.
The jam may also be located near the film tray. Remove the
film tray to check.