HP 53150A Series Programming Manual page 116

Chapter 4 Command Reference
:MEASure Subsystem
Descriptions of the Measurement Functions
Table 4-2 lists the available measurement functions, the parameters that
can be used with them, and the valid values for <source_list>.
Table 4-2. The <function>, <parameters>, and <source_list> for the
Measure Instruction Commands
<function>
[:VOLTage]:FREQuency
:POWer[:AC]
* <source_list> uses the same syntax as SCPI <channel _list>.
:MEASure[:SCALar][:VOLTage]:FREQuency?
COMMAND
[<expected_value>[,<resolution>]] [,(@1) | (@2)]
This command measures frequency.
<expected_value>
FUNCTION
DESCRIPTION
Channel 1 range
Channel 2 range:
default:
<resolution>
description:
values:
default:
<source_list>
description:
values:
default:
response format:
4-16
<parameters>
[<expected_value>[,<resolution>]]
[<expected_value>[,<resolution>]]
10 Hz to 125 MHz | MIN | MAX | DEF
100 MHz to 20 GHz (53150A), 26.5 GHz (53151A), 46 GHz (53152A)
MIN | MAX | DEF
100 MHz
The value specifies the frequency resolution for the measurement.
1Hz | 10 Hz | 100 Hz | 1 KHz | 10 KHz | 100 KHz | 1 MHz | DEF
1 Hz
Specifies which front-panel input is used for the measurement.
(@1) | (@2 )
(@2)
<NR1>
[,<source_list>]*
[,(@1) | (@2)]
[,(@2)]
Programming Guide