HP 53150A Series Programming Manual page 121

Chapter 4 Command Reference
:MEMory Subsystem
:MEMory:CLEAR[:NAME] . . . <name>
COMMAND
Resets the contents of the named power-correction profile to the default
configuration.
•
COMMENTS
•
•
•
Shift + Menu (PWR CORR)
RELATED
FRONT-PANEL
KEYS
:MEMory:NSTates?
COMMAND
Queries the Number of available *SAV/*RCL STates in the instrument.
•
QUERY RESPONSE
•
•
Query only.
COMMENTS
None
RELATED
FRONT-PANEL
KEYS
Programming Guide
Valid profile names: CORR1, CORR2, . . . CORR9
The data currently stored in non-volatile memory for the named
correction profile is discarded.
The default power-correction profile configuration consists of two data
points, both having loss values of zero. One of these points contains a
frequency value of 1 GHz, and the other contains a frequency value
equal to the highest frequency the Counter model can measure
(53150A: 20 GHz; 53151A: 26.5 GHz; 53152A: 46 GHz). The remaining
eight data points contain loss and frequency values of zero.
This is an event. There is no query form of this command.
Numeric data transferred as ASCII bytes in <NR1> format.
The value returned is 9.
The response value is one greater than the maximum which can be
sent as a parameter to the *SAV and *RCL commands.
4-21