HP 53150A Series Programming Manual page 123

Chapter 4 Command Reference
[:SENSe] Subsystem
[:SENSe]:CORRection:CSET:SELect . . . <name>
COMMAND
Selects a power-correction profile by name from nine available profiles.
Valid profile names: CORR1, CORR2, . . . CORR9
• *RST: CORR1
COMMENTS
• The correction-profile setting is applied for the current session only.
To store the profile selection in non-volatile memory, issue a *SAV
command.
Shift + Menu (PWR CORR > OFF | 1 . . . 9)
RELATED
FRONT-PANEL
KEYS
[:SENSe]:CORRection:CSET:STATe . . . <Boolean>
COMMAND
Enables or disables power-correction mode with the currently selected
power-correction profile applied.
• *RST: OFF
COMMENTS
• The power-correction state is applied for the current session only. To
store the setting in non-volatile memory, issue a *SAV command.
Shift + Menu (PWR CORR > OFF | 1 . . . 9)
RELATED
FRONT-PANEL
KEYS
Programming Guide 4-23