Jpdg Fuse Fu12/Fu13 (Jfb Connector) Is Blown; Jpdg Fuse Fu14/Fu15 (Jfc Connector) Is Blown; Jpdg Fuse Fu16/Fu17 (Jfd Connector) Is Blown; Jpdg Fuse Fu18/Fu19 (Jfe Connector) Is Blown - GE Mark VIeS System Manual

213
Description JPDG fuse FU12/FU13 (JFB connector) is blown.
Possible Cause The FU12 or FU13 fuse is blown.
Solution
• Replace the fuse.
• If the 24/48 V dc input is not used, this diagnostic alarm can be disabled by setting the InputDiagEnab parameter on the
associated input (DC_24VFdbkMag) to Disabled.
214
Description JPDG fuse FU14/FU15 (JFC connector) is blown.
Possible Cause The FU14 or FU15 fuse is blown.
Solution
• Replace the fuse.
• If the 24/48 V dc input is not used, this diagnostic alarm can be disabled by setting the InputDiagEnab parameter on the
associated input (DC_24VFdbkMag) to Disabled.
215
Description JPDG fuse FU16/FU17 (JFD connector) is blown.
Possible Cause The FU16 or FU17 fuse is blown.
Solution
• Replace the fuse.
• If the 24/48 V dc input is not used, this diagnostic alarm can be disabled by setting the InputDiagEnab parameter on the
associated input (DC_24VFdbkMag) to Disabled.
216
Description JPDG fuse FU18/FU19 (JFE connector) is blown.
Possible Cause The FU18 or FU19 fuse is blown.
Solution
• Replace the fuse.
• If the 24/48 V dc input is not used, this diagnostic alarm can be disabled by setting the InputDiagEnab parameter on the
associated input (DC_24VFdbkMag) to Disabled.
360 GEH-6855_Vol_II GEH-6855_Vol_II Mark VIeS Functional Safety Systems Volume II
Public Information