Table of Contents
Advertisement
8.
Loosely install the crosslink tubes to the rear
mount brackets and rear corner gussets using 4
carriage bolts (5/16 x 1-3/4 inches) and 4 flange
nuts (5/16 inch) as shown in
1. Carriage bolt (5/16 x 1-3/4
inches)
2. Front mount bracket
3. Corner gusset
4. Flange nut (5/16 inch)
9.
Loosely install the front mount brackets and front
corner gussets to the crosslink tubes and the
windshield supports using 8 carriage bolts (5/16
x 1-3/4 inches) and 8 flange nuts (5/16 inch) as
shown in
Figure
10.
Loosely install the front crosslink to the front
mount brackets and corner gussets using 4
carriage bolts (5/16 x 1-3/4 inches) and 4 flange
nuts (5/16 inch) as shown in
1. Carriage bolt (5/16 x 1-3/4
inches)
2. Flange nut (5/16 inch)
11.
Use 2 hex-head flange bolts (1/4 x 1-1/2 inches)
and 2 nuts (1/4 inch) to secure the front support
to the front crosslink
Figure
35.
Figure 35
5. Rear mount bracket
6. Crosslink tube
7. Windshield support
35.
Figure
36.
Figure 36
3. Front crosslink
(Figure
37).
1. Front crosslink
2. Front support
g231407
12.
Tighten all loose fasteners.
g036759
17
Figure 37
3. Nut (1/4 inch)
4. Hex-head flange bolt (1/4
x 1-1/2 inches)
g214868
Advertisement
Table of Contents
