Toro 07161 Installation Instructions Manual page 22

Figure 44
View from under the front hood
1. Guard mounting holes
(headlight mount bracket)
2. Drill bit 11 mm (7/16 inch)
4. Assemble the headlight guards onto the
headlights as shown in
Figure 45
1. Headlight guard
g237573
3. 37 mm (1-7/16 inches)
Figure 45.
g237536
2. Headlight
5. Align the 3 headlight-adjusting nuts through the
holes in the headlight mounting bracket and
secure the nuts with the clips
you removed in step
1. Headlight-adjusting nut
2. Headlight bracket
6. Connect the 2-socket connector of the machine
wire harness to the 2-pin connecto at the back
of the headlight
7. Secure the head light guard to the headlight
mount brackets
(5/16 x 5/8 inch).
1. Headlight guard
22
(Figure 43) that
2 .
Figure 46
3. Clip
4. 2-socket connector
(machine wire harness)
(Figure 46).
(Figure 45) with the 4 flange bolt
Figure 47
2. Flange bolt (5/16 x 5/8
inch)
g237537
g237539