NEC PASOLINK Training Course page 90

ROI-S04488
Step
4 Enter the specified password from the keyboard and press the
"Enter" key,
Password
Note: When the PC is connected to the NMS/RA terminal to
control the opposite station, enter password for that
station.
5 Press the "0" key and "Enter" key. Then, perform step 8. If the
password should be changed, press the "1" key and "Enter" key,
Password
Change password? (no:0 / yes:1) :
6 Enter the new password from the keyboard and press the
"Enter" key,
Password
Change password? (no:0 / yes:1) : 1
New password
Note: For password, "0" to "9", "A" to "Z" and "a" to "z"
are available (31 letters maximum).
7 To confirm the password, re-enter the password from the
keyboard and press the "Enter" key,
Password
Change password? (no:0/yes:1) : 1
New password
New password (Re-enter)
8 Following menu item is displayed,
1. Setting
2. Maintenance
3. Monitoring
99. Exit
Select function No. :
Procedure
:
: ********
: *********
:
: *********
: **********
: **********
OPERATION
3-33