NEC PASOLINK Training Course page 92

ROI-S04488
Step
"N" : signifies not used channel in alarmed or
"U" : signifies E1 channel which is used.
6. In item No. 10 and item No. 11, 232 (i.e. RS232C) is
standard.
10 Press the "2" key and "Enter" key, then, following item is
displayed,
2. AIS RCVD alarm/status (status)
AIS RCVD alarm/status (status:0 / alarm:1):
Note: When AIS RCVD "status" is selected, AIS RCVD is not
indicated under the input signal alarm state. When AIS
RCVD "alarm" is selected, AIS RCVD is indicated
under the input signal alarm state.
11 Press either "0" or "1" key and "Enter" key for setting, if not,
press the "Esc" key,
12 Press the "3" key and "Enter" key, then, following item is
displayed,
3. AIS SEND status/alarm (status)
AIS SEND status/alarm (status:0 / alarm:1):
Note: When AIS SEND "status" is selected, AIS SEND is not
indicated under the AIS state. When AIS SEND "alarm"
is selected, AIS SEND is indicated under the AIS state.
13 Press either "0" or "1" key and "Enter" key for setting, if not,
press the "Esc" key,
14 Press the "6" key and "Enter" key, then, following item is
displayed,
6. Main channel usage 1-16
(1:used
5:not used
9:not used 10:not used
13:not used 14:not used
Select channel No. :
Procedure
controlled status for each E1 channel .
2:used 3:N/A
6:not used 7:not used
11:not used
15:not used
OPERATION
4:not used
8:not used
12:not used
16:not used)
3-35