NEC PASOLINK Training Course page 95

OPERATION
3-38
Step
26 Enter 11 and the "Enter" key, then, following item is displayed,
11. DSC 2 (232)
DSC 2 (232:0 / 422:1 / 485(TERM):2 / 485(NON TERM):3):
27 Press any "0" to "3" key and "Enter" key for setting, if not,
press the "Esc" key,
Note: 232 — RS-232C provides standard,
422 — RS-422 is applicable when optional DSC INTFC is
provided,
485 (TERM)— RS-485 (Terminating) is applicable when
optional ASC INTFC is provided,
485 (NON TERM)— RS-485 (Non-Terminating) is
applicable when optional ASC INTFC is provided.
28 Enter 12 and press the "Enter" key, then, following item is
displayed,
12. DEM invert (off)
DEM Invert (off:0 / on:1)
29 Press the "0" or "1" key and "Enter" key for setting, if not, press
the "Esc" key,
30 Enter 13 and press the "Enter" key, then, following item is
displayed,
Note: The following display is for initial values.
resetting of item is required, perform steps 31 to 35 for
corresponding item.
Procedure
:
ROI-S04488
When the