HP 9000 300 Series Hardware Configuration Manual page 149

10
HP 98658A Small Controller Systems
Interface Card
Operating System Support
Operating/language system support is as follows:
• BASIC: supported on revision 4.0 or later with Series 300 controllers.
• Pascal System: supported on revision 3.1 or later with Series 300 controllers.
• HP- UX Operating System: supported on revision 5.0 or later with Series 300
controllers.
Preliminary Requirements
Find out what your application's accessory SCSI interface function values need
to be set to. These functions are:
• Select Code.
• Interrupt level.
• Bus address.
• Parity.
Your HP 98658A SCSI Interface Card must be set to the values your
application requires.
Setting the Configuration Switches
The HP 98658A SCSI Interface Card's configuration switches are shown in
Figure 10-12.
10-40 Configuring Popular Accessory Cards