HP 9000 300 Series Hardware Configuration Manual page 59

Model 382 Controller
Determining Existing Memory
Follow these steps to determine how much memory your controller.already has:
1. If your controller is operating, shut down the operating system following
normal procedures. Refer to your controller's Owner's Guide for
instructions.
2. Turn off your controller, then turn it ON.
3. When the power-up display shown in Figure 5-1 lists the line:
HP-HIL.Keyboard
5 press the
(Space bar ).
4. Note the amount of Random Access Memory (RAM) in bytes listed in the
line that reads:
RAM xxxxxxx Bytes
5. Write the amount here: RAM _ _ _ _ _ _ _ _ _ Bytes.
Note that the actual amount of RAM will be about 4.9% higher than the
amount commonly stated. For example, '8 000 000' bytes (8 megabytes) is
actually 8 388 308 bytes.
5-10 Memory Configurations