Toro 260 Series Service Manual page 49

10. Loosen the left pedal pivot shaft clamp. Remove
the right pedal pivot shaft clamp (Figure 92).
Figure 92
11. Unhook the brake rod return spring, located under
the center access plate (Figure 93).
Figure 93
260 Series Tractor Service Manual
TUFF TORQ TRANSAXLE
12. Remove the roll pin holding the brake cross shaft
and slide the shaft out to clear the bushing (Figure
94).
MVC-351X
13. Install the belt around and above the electric
clutch. Feed the belt above the steering sector
gear and over the brake shaft and pedal pivot
shaft (Figure 95).
MVC-352X
C
(A) Brake Shaft
(B) Pedal Pivot Shaft
Figure 94
A
B
Figure 95
(C) Steering Sector
Gear
MVC-353X
MVC-354X
3 - 9