HYDRO-GEAR TRANSAXLE
10. Make sure the belt is routed to the outside of the
brake rod (Figure 156).
Figure 156
11. Connect the hydrostatic rod to the forward/reverse
hydro pedal (Figure 157).
Figure 157
4 - 14
12. Install the two steering links to the steering sector
gear (Figure 158).
MVC-190X
13. Reconnect the brake rod at the transaxle. Install
the castle nut and spring (Figure 159). Before
installing the cotter pin, check the brakes, refer to
"Checking the Brake" on page 4 - 9.
MVC-191X
Figure 158
Figure 159
260 Series Tractor Service Manual
MVC-192X
MVC-193X