Belt Routing - Toro 260 Series Service Manual

TUFF TORQ TRANSAXLE

Belt Routing

Figure 96
14. Install the belt around the transaxle input pulley
and then around the idler pulley assembly. Install
the idler spring to the bolt, spacer, and washer
located on the right side of the frame (Figure 97).
Figure 97
3 - 10
15. Slide the brake shaft back through the bushing
and install the roll pin. Raise the pedal pivot shaft
up to the footrest and install and tighten the
clamps (Figure 98).
Beltroute
16. Install the 2 bolts in the safety neutral bracket and
tighten the bolts (Figure 99).
MVC-356X
Figure 98
Figure 99
260 Series Tractor Service Manual
MVC-357X
MVC-346X