Toro 260 Series Service Manual page 58

TUFF TORQ TRANSAXLE
5. Loosen the locknut (B), (Figure 116), and turn the
eccentric (A), (Figure 116) clockwise until the axle
starts to rotate.
B
Figure 116
(A) Eccentric
6. Now rotate the eccentric counterclockwise until
the axle starts to rotate the other direction. You
want to adjust the eccentric so it is set mid-point
between the forward and reverse axle rotation,
tighten the locknut.
7. Check the neutral adjustment by depressing the
motion control pedal in forward and reverse. At
full throttle, there should be no wheel movement
after the pedal returns to neutral. Readjust as
needed until neutral is obtained.
3 - 18
A
MVC-384X
(B) Locknut
260 Series Tractor Service Manual