Advertisement
3.2 CONNECTION OF POWER LINE
1. Make sure the voltage of incoming power supply is correct according
to required or as marked on the unit.
2. Power wires, grounding and over voltage protector should be comply
with the local electricity regulations.
For wiring to other voltages, be sure to rewire the spindle motor,
coolant system, dust suction device and transformer to correct
voltage, the relevant currents, fuses and overload relays are shown in
the electrical manual.
Note:Do not turn on the machine motor when its voltage is different
from power voltage and contact electric technician from
reparation.
3. For connecting the power supply, the electrical technical valued are
provided as following:
400V, 3 – 50HZ
Cable cross section:16mm²
Fuse: 60A
Figure 1
-26-
Advertisement
