Advertisement
SPINDLE SPEED MANUAL
This switch could control spindle speed, the speed change to slow when switch
turn left, the speed change to quickly when switch turn right.
SPINDLE LOAD METER
This meter indicates the load applied to the main motor in percent (%),when
the spindle speed is in the rated output range, the 100% on the scale d
represents continuous rating, 150% represents 30 minutes, do not overload
running which will cause spindle motor be damaged.
EMERGENCY STOP
This button is used in case of emergency, if this machine gets any trouble
or works in wrong way, push this button immediately.
X AXIS SELECT SWITCH
Select X axis push +X or -X and the lamp on.
SELECT GRADUATION SWITCH
X-1 = 0.001mm/pulse
X-10 = 0.01mm/pulse
X-100 = 0.1mm/pulse
Z AXIS SELECT SWITCH
Select Z axis push +Z or -Z and the lamp on.
-50-
Advertisement
