3.4 LIFTING MACHINE
3.4.1 Transportation by crane (model TY-3480CNC/ TY-3880CNC/ TY-4280CNC
Only)
Notice :
1.
Only an authorized technician should be perform work with machine lifting.
2.
Capacity of truck must be 3 tons at least.
3.
Make sure there is no obstacle or personnel on the move, path and left
on the machine.
4.
Keep machine's balance and move slowly.
We do not recommend lift and transportation machine by crane.
---------------------------------------------------
3.5 PLACING THE MACHINE
Before placing the machine, fi x the adjusting screw on the base, makes machine
as close as possible to the fl oor and position of leveling pads in their most
suitable place, increase the stability of machine.
-28-
Figure 2