Advertisement
8. After power, please check:
(1) Make sure that the rotation directions of spindle motor and coolant motor
are correct.
(2) Inspect if the lub working properly.
(3) Check if the machine lamp working.
(4) Check if the servo motor on 2 axes working properly.
9. Voltages required:
220VAC/ 35A
380VAC/ 25A
415VAC/ 20A
440VAC/ 20A
480VAC/ 20A
10. Power rate:
(1) Spindle : 10HP
(2) Coolant: 1/4HP
(3) Lub: 100W
(4) Machine lamp : 50W
(5) X & Z axes : 2000W
(6) Controller : 300W
-45-
Advertisement
