Advertisement
(5) The function of the machine make it impossible to eliminate all pinch points,
bc particularly aware of the following pinch points:
-Spindlc and chuck rotation
-Indexing of turret and tools
-Carriage and cross slide movement
-Tailstock movement, both quill and body
(6) Never allow chips, coolant or oil remain on the fl oor, do not leave loose object
on or around machine.
(7) Clothing:
*Wear safety glasses with eye shields all times.
*Never use a compressed air hose to remove chips from a machine
*Do not wear rings, watches, tie or loose sleeve clothing.
*Gloves are easily caught in moving parts, take them off before
turning machine .
*Always wear safety shoes with steel toes and oil resistance soles.
*Never remove protection for even a short time when operating the
machine.
*Know the correct way to wear protective devices.
If operator has long hair, hair should always be tucked under a cap
or tied back and up, beware of loose hair near the rotating parts of lathe.
(8) Turning machines are designed to be ran by one person, persons other than the
designed operator should stay out of the machine area during operation.
(9) Take care not to bump or accidentally touch any machine control.
(10) Do not paint, alter, deface or remove any warning plates from the machine,
replacement plates are available from MICROWEILY.
(11) Do not operate machine while talking.
(12) Never operate the machine after taking strong medication, using non-
prescription drugs or consuming alcoholic beverages. Persons with illnesses
which might cause dizziness or fainting should never operate this machine.
(13) The electric components arc protected from normal moisture resulting from
humidity use of water base solubles as coolant, etc., DO NOT use water
clean the machine or the are around it.
-4-
Advertisement
