Advertisement
Maintenance Options Screen
Maintenance PIN Screen
Push button 3 on the Settings screen.
Push the OK button to access the PIN screen
55).
The Maintenance pin number is 12356.
Figure 54
Figure 55
Resetting the Maintenance Intervals
1.
Enter the maintenance PIN and await
confirmation of correct PIN message.
2.
Push the OK button to start the reset process.
3.
Navigate to the
Maintenance Schedule Screens
(page
16).
4.
Select the interval that you want to reset.
5.
Push the interval number 2 more times to reset
the interval.
Exit Side Lockout Settings
Note:
Software version A.5 and up
If your exit-side-lockout handheld remote loses its
signal, runs out of batter power, or gets damaged, you
can disable the system in order to continue working.
(Figure
Push button 4 on the Settings screen to access the
screen to enable/disable the exit side lockout system.
Use the up and down arrows to change the setting.
If you disable the exit side lockout, prior to working on
the drill string, turn off the machine, remove and take
the ignition key to the drill string operator/location.
Once the drill string work is complete, you may start
the machine and continue drilling.
g291099
Exit Side Lockout Disabled Screen
Warning message: Exit side lockout disabled.
Remove and take ignition key to drill string location
until work is complete.
g291098
18
Figure 56
Figure 57
Exit Side Lockout Enabled Screen
g270156
g270561
Advertisement
